firmware mismatch problem

After opening the app and ask to upgrade , upon reboot and got this issue. 

Then after this the hotspot for the dash cam can not be seen anymore and dashcam shutsdown.

I tried it below

1. download the firmware(1.0.17ww)

2. unzip and put it on the SD card (just in the main folder / no need to formating the SD card)

3. put the SD card back in the dashcam and make sure it is connected to power cable

4. hold from right the first button + the power button for (5 seconds) until you see the BLUE LED


5. wait for the BLUE LED to turn off and the dashcam should restart and work now

--> I can't any more

Is there a way to initialize normally?

New Post (1)
  • Danil 5 Days+
    0 Quote 2Floor
    No, make it easier, don't press any buttons!

    1. download the firmware (1.0.17ww)

    2. Unzip the archive and put it on the SD card (only in the main folder / no need to format the SD card).

    3. Insert the SD card back into the DVR.

    4. Connect the power. Do not press any buttons.

    5. Wait until the BLUE LED goes out and the DVR should reboot and start working.
    5 Days+
Create New Thread